Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 794 / 1191

S2600E CLI Reference Guide Chapter 15 NFPP Configuration Commands
dhcp-guard attack-threshold { per-src-mac | per-port } pps
Parameter Description
per-src-mac
Set the attack threshold for each
source MAC address.
per-port Set the attack threshold for each port.
Parameter
description
pps
Set the attack threshold, in pps. The
valid range is [1,9999].
Default
Settings
By default, the attack threshold for each source MAC
address is 10pps; and the attack threshold for each port is
300pps.
Command
mode NFPP configuration mode.
Usage
guidelines N/A.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# dhcp-guard attack-threshold
per-src-mac 15
Ruijie(config-nfpp)# dhcp-guard attack-threshold
per-port 200
Command Description
nfpp dhcp-guard
policy
Show the rate-limit threshold
and attack threshold.
show nfpp dhcp-guard
summary
Show the configurations.
show nfpp dhcp-guard
hosts
Show the monitored host list.
Related
commands
clear nfpp dhcp-guard
hosts
Clear the monitored host.
15.3.2 dhcp-guard enable
Use this command to enable the DHCP anti-attack function.
dhcp-guard enable