Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 278 / 1191

S2600E/P CLI Reference Guide Chapter 3 IPv6 Configuration Commands
to ensure other devices along the link occupies network
bandwidth while sending the RA message, the actual
interval for sending the RA message will be fluctuated 20%
based on the set value.
If the key word min-max is specified, the actual interval for
sending the packet will be chosen between the range of
minimum value and maximum value.
Examples
Ruijie(conifig-if)# ipv6 nd ra-interval 110
Ruijie(config-if)# ipv6 nd ra-interval min-max 110 120
Command Description
show ipv6
interface
Show the interface information.
ipv6 nd
ra-lifetime
Set the lifetime of the device.
ipv6 nd
ra-hoplimit
Set the hopfcount of the RA message.
Related
commands
ipv6 nd ra-mtu Set the MTU of the RA message.
3.1.14 ipv6 nd ra-lifetime
Use this command to set the device lifetime of the RA sent on the interface. Use
the no form of this command to restore it to the default setting.
ipv6 nd ra-lifetime seconds
no ipv6 nd ra-lifetime
Parameter Description
Parameter
description
seconds
Default life time of the device on the
interface, 0-9000.
Default
configuration 1800s.
Command
mode Interface configuration mode.
Usage
guidelines
The router lifetime field is available in each RA. It specifies
the time during which the hosts along the link of the
interface can select the device as the default device. If the