Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 58 / 1191

S2600E/P CLI Reference Guide Chapter 3 SSH Configuration Commands
Command Description
Related
commands
show ip ssh
Show the current status of the SSH
Server.
Version
description The software version must be RGOS10.1 and higher.
3.1.4 ip ssh
time-out
Use this command to set the authentication timeout for the SSH Server. Use the
no form of this command to restore it to the default setting.
ip ssh time-out time
no ip ssh time-out
Parameter Description
Parameter
description
time Authentication timeout
Default
configuration The timeout value is 120s by default.
Command
mode Global configuration mode.
Usage
guidelines
The authentication is considered timeout and failed if the
authentication is not successful within 120s starting from
receiving a connection request. Use the show ip ssh
command to view the configuration of the SSH server.
Examples
The following example sets the timeout value as 100s:
Ruijie# configure terminal
Ruijie(config)# ip ssh time-out 100
Command Description
Related
commands
show ip ssh
Show the current status of the SSH
Server.
Version
description The software version must be RGOS10.1 and higher.