Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 630 / 1191

S2600E CLI Reference Guide Chapter 5 Web Authentication Configuration Commands
authentication.
To enable VLAN-based authentication, you need to enable Web
authentication on the downlink port of the device and turn the port
to the TRUNK mode.
Configuration
Example
Example 1: Set authenticated VLANs to VLAN 1, VLAN 2, VLAN
3, and VLAN 5.
Ruijie(config)# web-auth allow-vlan 1-3,5
Command Description
Related
Commands
show web-auth
allow-vlan
View the VLAN list supporting
VLAN-based Web authentication.
5.1.9 web-auth direct-host
This command is used to set the IP address free of authentication. The no
form of this command is used to cancel the IP address free of
authentication.
web-auth direct-host { ipv6-address | ipv6-prefix/prefix-length | ip-address
[i p-mask ] [ arp ] } [ port interface-name ]
no web-auth direct-host { ipv6-address | ipv6-prefix/prefix-length |
ip-address [i p-mask ] }
Parameter Description
ipv6-address IPv6 address free of authentication
ipv6-prefix/prefix-length IPv6 address prefix and prefix
length. Users using IP addresses in
the range can be free of
authentication.
ip-address IPv4 address free of authentication
ip-mask Mask of the IPv4 address free of
authentication (optional).
Parameter
Description
port interface-name Bind user’s IP address with a port of
the access device (optional).