Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 822 / 1191

S2600E CLI Reference Guide Chapter 15 NFPP Configuration Commands
clear nfpp
icmp-guard hosts
Clear the isolated host.
15.6 ND-guard Configuration
Commands
The ND-guard configuration commands include:
15.6.1 nd-guard attack-threshold
Use this command to set the global attack threshold. When the packet rate exceeds the attack
threshold, the attack occurs.
nd-guard attack-threshold per-port { ns-na | rs | ra-redirect } pps
Parameter Description
ns-na
Set the neighbor request and
neighbor advertisement.
rs Set the router request.
ra-redirect
Set the router advertisement and the
redirect packets.
Parameter
description
pps
Set the attack threshold, in pps. The
valid range is [1,9999].
Default
Settings
By default, the default attack threshold for the ns-na, rs and
ra-redirect on each port is 30.
Command
mode
NFPP configuration mode.
Usage
guidelines
The attack threshold shall be equal to or larger than the
rate-limit threshold.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# nd-guard attack-threshold per-por
t ns-na 20
Ruijie(config-nfpp)# nd-guard attack-threshold per-por
t rs 10
Ruijie(config-nfpp)# nd-guard attack-threshold per-port
ra-redirect 10