Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 79 / 1191

S2600E/P CLI Reference Guide Chapter 5 Network Connectivity Test Tool
Configuration Commands
traceroute [ vrf vrf-name | ip ] [ ip-address [ probe number ] [ source source ]
[ timeout seconds ] [ ttl minimum maximum ]]
Parameter Description
vrf-name VRF name
ip-address Specifies an IPv4 address.
number
Specifies the number of probe packets
to be sent.
source
Specifies the source IPv4 address or
the source interface. The loopback
interface address(for example:
127.0.0.1) is not allowed to be the
source address.
seconds Specifies the timeout time.
Parameter
description
minimum
maximum
Specifies the minimum and maximum
TTL values.
Command
mode
Privileged mode.
Usage
guidelines
Use the traceroute command to test the connectivity of a
network to exactly locate the network connectivity problem
when the network failure occurs. To use the function
domain name, configure the domain name server. For the
concrete configuration, refer to the DNS Configuration
part.
Examples
The following is two examples of the application bout
traceroute, the one is of the smooth network, and the other
is the network in which some gateways aren’t connected
successfully.
1. When the network is connected smoothly:
Ruijie# traceroute 61.154.22.36
< press Ctrl+C to break >
Tracing the route to 61.154.22.36
1 192.168.12.1 0 msec 0 msec 0 msec
2 192.168.9.2 4 msec 4 msec 4 msec
3 192.168.9.1 8 msec 8 msec 4 msec
4 192.168.0.10 4 msec 28 msec 12 msec
5 192.168.9.2 4 msec 4 msec 4 msec
6 202.101.143.154 12 msec 8 msec 24 msec
7 61.154.22.36 12 msec 8 msec 22 msec