Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 901 / 1191

S2600E CLI Reference Guide Chapter 1 ACL Configuration Commands
Command Description
Related
commands
show
access-lists
Show the ACLs.
Platform
description N/A
1.1.7 ip access-list resequence
Use this command to reassign the sequence of the IP ACL entries and enter the
corresponding configuration mode. Use the no form of this command to restore
it to the default configuration.
ip access-list resequence { id | name } start-sn inc-sn
no ip access-list resequence { id | name }
Parameter Description
id ACL ID
name ACL name
start-sn Start sequence
Parameter
description
inc-sn Sequence increment
Default
configuration
The start sequence is 10 and the sequence increment is
10.
Command
mode Global configuration mode
Usage
guidelines
You can use the show access-lists command to show the
configuration result.
Examples
Resequence the entries of the ACL:
Ruijie# show access-lists
ip access-list standard 1
10 permit host 192.168.4.12
20 deny any any
Ruijie# config
Ruijie# (config)# ip access-list resequence 1 21 43
Ruijie# (config)# exit
Ruijie# show access-lists
ip access-list standard 1