Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 634 / 1191

S2600E CLI Reference Guide Chapter 5 Web Authentication Configuration Commands
Configuration
Example
Example 1: Enable user's online status check based on traffic.
Ruijie(config)# web-auth offline-detect-mode flow
Command Description
Related
Commands
show web-auth user
View the online information of all users or
certain users.
Platform
Description
None
5.1.11 web-auth port-control
This command is used to enable Web authentication on a port. The no
form of this command is used to disable Web authentication on a port.
web-auth port-control [ ip-only-mode ]
no web-auth port-control
Parameter
Description
Parameter Description
ip-only-mode By default, when a user passes Web
authentication, its IP and MAC addresses
are bound with the port. A MAC address
may correspond to several IP addresses,
so when the physical interface is
connected to a L3 device, this parameter
must be set to bind the only IP address of
the authenticated user with the port. After
the mode switchover, all online users
connected to the physical interface are
forced to log off. They must be
authenticated again.
Default
Configuration
Web authentication is disabled on port.