Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 579 / 1191

S2600E CLI Reference Guide Chapter 4 802.1X Configuration Commands
Command
mode Global configuration mode.
Usage
guidelines
With this function enabled, the user that has passed the
802.1x authentication is permitted to move to other ports. If
this function is disabled, the user can not access the
network after moving to the new port.
Examples
Ruijie# configure terminal
Enter configuration commands, one per line. End with
CNTL/Z.
Ruijie(config)# dot1x mac-move permit
Ruijie(config)# end
Command Description
Related
commands
show dot1x Show the configuration about 802.1x
4.5.17 dot1x max-req
During interaction between the dot1x and the server, the dot1x will send a request to the server
again if it does not receive a response from the server within a certain period of time. Use this
command to set the maximum number of authentication requests sent to the server. Use the
no form of the command to restore it to the default value.
dot1x max-req count
no dot1x max-req
Parameter Description
Parameter
description
count
Maximum number of authentication
requests sent to the server.
Default The default value is 3.
Command
mode Global configuration mode.
Usage
guidelines
Use the show dot1x command to show the 802.1X
configuration.