Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 440 / 1191

S2600E/P CLI Reference Guide Chapter 1 IGMP Snooping Commands
commands
ip igmp snooping querier
max-response-time
Globally configure the
maximum response
time to query packets.
1.1.27 ip igmp snooping vlan querier query-interval
To specify the interval for IGMP querier to send query packets of a specific
VLAN, execute the global configuration command of " ip igmp snooping vlan
querier query-interval ". Use no form of this command to restore the query
interval to the default value.
ip igmp snooping vlan vid querier query-interval num
no ip igmp snooping vid querier query-interval
Parameter Description
vid VLAN ID
Parameter
description
num
Query interval
(1-18000); unit: second;
default: 60 seconds
Default Default value
Command
mode
Global configuration mode.
Usage
guidelines
After globally enabling IGMP querier, the timer will be
enabled for sending query packets periodically. The aging
time of the timer is the query interval. Configure this
command to change the query interval.
If query interval has been configured in the corresponding
VLAN, the value specified in VLAN will be used first.
Examples
The following example configures the query interval for
specific VLAN on the device:
Ruijie(config)# ip igmp snooping vlan 3 querier
query-interval 100
Related
Command Description