Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 815 / 1191

S2600E CLI Reference Guide Chapter 15 NFPP Configuration Commands
Usage
guidelines
When the attacker is detected, if the isolate period is
0, the attacker will be monitored by the software and the
timeout time will be the monitor period. During the
software monitoring, if the isolate period is not 0, the
software-monitored attacker will be auto-isolated by the
hardware and the timeout time will be the isolate period.
The monitor period is valid with the isolate period 0.
If the isolate period has changed to be 0, the
attackers on the interface will be removed rather than
being monitored by the software.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# icmp-guard monitor-period 180
Command Description
show nfpp
icmp-guard summary
Show the configurations.
show nfpp
icmp-guard hosts
Show the monitored host list.
Related
commands
clear nfpp icmp-guard
hosts
Clear the isolated host.
15.5.5 icmp-guard
monitored-host-limit
Use this command to set the maxmum monitored host number.
icmp-guard monitored-host-limit number
Parameter Description
Parameter
description
number
The maximum monitored host
number. The valid range is
1-4294967295.
Default
Settings
1000
Command
mode
NFPP configuration mode