Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 977 / 1191

S2600E CLI Reference Guide Chapter 3 TPP Configuration Commands
3.1.2 tp-guard port enable
Use this command to enable the topology protection function on the port. Use
the no form of this command to disable the function.
[ no ] tp-guard port enable
Parameter
description N/A.
Default
configuration N/A.
Command
mode Interface configuration mode.
Usage
guidelines
If both the global topology protection function and the
topology protection function of the port are enabled, the
remote device of this port will be notified when the CPU
utilization of the local device is too high or there are other
problems with the local device. This command is
applicable to the layer 2 switching interfaces and routing
interfaces. Other interfaces (including AP member port) do
not support this command.
Examples
The following example shows how to configure the
topology protection function for the port:
Ruijie(config-if)# tp-guard port enable
Ruijie(config-if)# no tp-guard port enable
Command Description
Related
commands
topology
guard
Enable the topology protection function
globally.
3.2 Showing Related Commands
3.2.1 show tpp
Use this command to show the configuration of topology protection.
show tpp