Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 816 / 1191

S2600E CLI Reference Guide Chapter 15 NFPP Configuration Commands
Usage
guidelines
If the monitored host number has reached the default
1000, the administrator shall set the max-number smaller
than 1000 and it will prompt the message that
%ERROR
：
The
value that you configured is smaller than current
monitored hosts 1000, please clear a part of monitored
hosts.
to remind the administrator of the invalid
configuration and removing the monitored hosts.
When the maximum monitored host number has been
exceeded, it prompts the message that
%
NFPP_ARP_GUARD-4-SESSION_LIMIT: Attempt to exceed limit
of 1000 monitored hosts.to
remind the administrator.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# icmp-guard monitored-host-limit
200
Command Description
Related
commands
show nfpp icmp-guard
summary
Show the configurations.
15.5.6 icmp-guard rate-limit
Use this command to set the rate-limit threshold globally.
icmp-guard rate-limit { per-src-ip | per-port} pps
Parameter Description
per-src-ip
Set the rate limit for each source IP
address.
per-port
Set the rate limit for each port.
Parameter
description
pps
Set the rate limit, in the range of
[1,9999]
Default
Settings
The default rate-limit threshold for each source IP address
is half of the value for each port.
Command
mode NFPP configuration mode.