Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 485 / 1191

S2600E CLI Reference Guide Chapter 1 AAA Configuration Commands
aaa authorization commands level { default | list-name } method1 [ method2 ...]
no aaa authorization commands level { default | list-name }
Parameter Description
level Command level to be authorized, 0-15.
default
When this parameter is used, the following defined
method list is used as the default method for command
authorization.
list-name
Name of the user authorization method list, which could
be any character strings.
Parameter
description
method
It must be one of the keywords listed in the following
table. One method list can contain up to four methods.
Keyword Description
none Do not perform authorization.
group Use the server group for authorization. At
present, the RADIUS server group is
supported.
Default Disabled.
Command
mode Global configuration mode.
Usage
guidelines
RGOS supports authorization of the commands executed
by the users. When the users input and attempt to execute
a command, AAA sends this command to the security
server. This command is to be executed if the security
server allows to. Otherwise, it will prompt command deny.
It is necessary to specify the command level when
configuring the command authorization, and this specified
command level is the default command level.
The configured command authorization method must be
applied to terminal line which requires for the command
authorization. Otherwise, the configured command
authorization method is ineffective.
Examples
The following example uses the server to
authorize the level 15 command:
Ruijie(config)# aaa authorization commands 15 default