Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 1039 / 1191

S2600E CLI Reference Guide Chapter 6 GRTD Configuration Commands
*****
Diagnostic test suite attributes:
M/C/*-Minimal bootup level test / Complete bootup level test / NA
P/V/*-Per port test / Per device test / NA
D/N/*-Disruptive test / Non-disruptive test / NA
X/*-Not a health monitoring test / NA
F/*-Fixed monitoring interval test / NA
E/*-Always enabled monitoring test / NA
A/I/*-Monitoring in active / Monitoring in inactive / NA
Y/O*-Key test / Non-key test / NA
R/*-Power-down line cards and need reload mainboard / NA
K/*-Require resetting the line card after the test completed /
NA
**************************************************************
*****
test interval
Thre-
ID Test Name Attributes day hh:mm:ss
shold
== ============================== ============= ============
====
1) PortLoopbackTest--------------> M*PDX******** not config
NA
2) InbandSelfTest----------------> ***DX******** not config
NA
3) MacSelfTest-------------------> ***DX******** not config
NA
4) TestCpld----------------------> ***DX****Y*** not config
NA
5) TestPCI-----------------------> ***DX******** 0
00:00:10 10
6) TestNandFlash-----------------> ***DX******** not config
NA
7) TestNorFlash------------------> ***DX******** not config
NA
8) TestI2C-----------------------> ***DX******** not config
NA
9) TestDdr-----------------------> ***DX******** not config
NA
M1: M8610-CM II
**************************************************************