Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 309 / 1191

S2600E/P CLI Reference Guide Chapter 5 DHCP Relay Configuration Commands
5.1.5 ip dhcp relay suppression
Use this command to enable the DHCP binding globally. The no form of this
command disables the DHCP binding globally and enables the DHCP relay
suppression on the port.
[ no ] ip dhcp relay suppression
Default
configuration
Disabled.
Command
mode
Interface configuration mode.
Usage
guidelines
After executing this command, the system will not relay the
DHCP request message on the interface.
Examples
The following example enables the relay suppression
function on the interface 1.
Ruijie# configure terminal
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# ip dhcp relay suppression
Ruijie(config-if)# exit
Ruijie(config)#
Command Description
Related
commands
service dhcp Enable the DHCP Relay.
Platform
description
-
5.1.6 ip helper-address
Use this command to add an IP address of the DHCP server. The no form of
this command deletes an IP address of the DHCP server.
The server address can be configured globally or on a specific interface.
Therefore, this command can run in the global configuration mode or the
interface configuration mode to add the DHCP server information.
[ no ] ip helper-address [ vrf vrf-name ] A.B.C.