Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 679 / 1191

S2600E CLI Reference Guide Chapter 7 Port-based Flow Control Configuration Commands
Default
configuration 128
Command
mode Interface configuration mode.
Usage
guidelines
The number of the secure address contains the sum of static secure
address and dynamically learnt secure address, 128 by default. If the
number of the secure address you set is less than current number, it
will prompt this setting fails.
Examples
The example below describes how to set the maximum number of the
secure address as 2 for interface g 0/10
Ruijie(config)# inter g0/10
Ruijie(config-if)# switchport port-security maximum 2
Command Description
show port-security Show port security
settings.
switchport port-security
Enable the
port-security.
switchport port-security
binding
Configure the secure
address binding.
Switchport port-security
mac-address
Set the static secure
address in the interface
configuration mode.
Related
commands
switchport port-security aging
Set the aging time for
the port secure
address.
7.1.11 nac-author-user maximum
Use this command to set the limited number of port IP address. Use the no form of the
command to disable the port IP address number limit.
nac-author-user maximum value
[ no ] nac-author-user maximum
Parameter Description
Parameter
description
value The limited IP address number
in the range of 1 to 1024.