Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 1079 / 1191

S2600E CLI Reference Guide Chapter 7 SEM Configuration Commands
ge: greater than or equal to
gt: greater than
le: less than or equal to
lt: less than
ne: unequal to
entry-val
entry-value
The value that triggers comparison.
entry-type {value |
increment | rate}
The value type that triggers
comparison.
exit-comb {or |
and}
The relation between exit-op and
exit-time.
exit-op operator
The method to recover comparison
(optional):
eq: equal to
ge: greater than or equal to
gt: greater than
le: less than or equal to
lt: less than
ne: unequal to
exit-val exit-value
The value to recover comparison
(optional)
exit-type {value |
increment | rate}
The value type to recover
comparison (optional).
exit-time
exit-time-value
The minimum time between
triggering the policy and monitoring
recovery (optional).
average-factor
average-factor-value
It is used by rate, and is the
changed statistical period when
multiplied by poll-int-value
poll-interval
poll-int-value
The comparing interval. By default,
it is 5s.
Default
configuration
No event is configured.
Command
mode
SEM configuration mode