Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 244 / 1191

S2600E/P CLI Reference Guide Chapter 1 IP Address Configuration Commands
no arp ip-address MAC-address type [ alias ]
Parameter Description
ip-address
The IP address that corresponds to the
MAC address. It includes four parts of
numeric values in decimal format
separated by dots.
MAC-address 48-bit data link layer address
type
ARP encapsulation type. The keyword
is arpa for the Ethernet interface.
Parameter
description
alias
(Optional) RGOS will respond to the
ARP request from this IP address after
this parameter is defined.
Default There is no static mapping record in the ARP cache table.
Command
mode Global configuration mode.
Usage
guidelines
RGOS finds the 48-bit MAC address according to the
32-bit IP address using the ARP cache table.
Since most hosts support dynamic ARP resolution, usually
static ARP mapping is not necessary. The clear
arp-cache command can be used to delete the ARP
mapping that is learned dynamically.
Examples
The following is an example of setting an ARP static
mapping record for a host in the Ethernet.
arp 1.1.1.1 4e54.3800.0002 arpa
Command Description
Related
commands
clear
arp-cache
Clear the ARP cache table
1.2.2 arp gratuitous-send interval
Use this command to set the interval of sending the free ARP request message
on the interface..The no form of this command disables this function on the
interface.