Optical Systems Design OSD2524 User Manual Download Page 48

Page: 48 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 48

The temperature at which the ports with the corresponding group will be turned off.
Temperatures between 0 and 255 C are supported.

Port groups

The group the port belongs to. 4 groups are supported.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

PORT CONFIGURATION

Configuration

→

Ports

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands

Optical Systems Design OSD2524, User Manual

Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands