Optical Systems Design OSD2524, User Manual

Page: 27 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 27
8 FITTING SFP CONNECTORS
Care should be taken when inserting/removing the SFP connectors from the SFP port as SFP modules are
Electrostatic (ES) sensitive and Electrostatic Discharge (ESD) precautions should be taken when installing. Ensure
that the SFP is fully engaged and latched into position.
Inserting SFP – Ensure that the SFP lever is in the locked position and insert into appropriate SFP port. Gently
push the SFP until it locks into place. Remove plastic/rubber dust cap and fit appropriate fiber cable.
Removing SFP – Remove fiber connector. Pull the SFP lever down to unlock SFP from housing. Using the lever,
gently pull the SFP out.
Fiber SFP
FIGURE 13: FITTING/REMOVING SFP CONNECTORS
Inserting
SFP
Removing
SFP
1
2