Optical Systems Design OSD2524, User Manual

Page: 193 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 193
This page allows you to create mappings of VLANs -> Translated VLANs and organize these
mappings into global Groups.
Group ID
The VLAN Translation mappings are organized into Groups, identified by the Group ID. This way a port
is configured to use a number of VLAN Translation mappings easily by simply configuring it to use a
given group. Then number of possible groups in a switch is equal to the number of ports present in this
switch. A port can be configured to use any of the groups, but only one at any given time. Multiple ports
can be configured to use the same group. A valid Group ID is an integer value from 1 to 14.
Note: By default, each port is set to use the group with Group ID equal to the port number. For example,
port #1 is by default set to use group with GID = 1.
VID
Indicates the VLAN of the mapping (i.e. 'source' VLAN). A valid VLAN ID ranges from 1 to 4095.
TVID
Indicates the VLAN ID to which VLAN ID of an ingress frame will be translated to (granted that the
mapping is enabled on the ingress port that the frame arrived at). A valid VLAN ID ranges from 1 to
4095.
Modification Buttons
You can modify each VLAN Translation mapping in the table using the following buttons:
: Edits the mapping row.
: Deletes the mapping.
: Adds a new mapping.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
: Refreshes the displayed table starting from the input fields.
: Click to remove all VLAN Translation mappings.
PRIVATE VLANS