Optical Systems Design OSD2524, User Manual

Page: 150 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 150
VLAN Configuration
Configuration
→
IPMC
→
IGMP Snooping
→
VLAN Configuration
NAVIGATING THE IGMP SNOOPING VLAN TABLE
Each page shows up to 99 entries from the VLAN table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the VLAN Table. The first displayed will be the one with the lowest
VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table.
Clicking the
button will update the displayed table starting from that or the next closest
VLAN Table match.
The will use the last entry of the currently displayed entry as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table. Use the
button to start over.
IGMP SNOOPING VLAN TABLE COLUMNS
Delete
Check to delete the entry. The designated entry will be deleted during the next save.
VLAN ID
The VLAN ID of the entry.
IGMP Snooping Enabled
Enable the per-VLAN IGMP Snooping. Up to 32 VLANs can be selected for IGMP Snooping.
Querier Election
Enable to join IGMP Querier election in the VLAN. Disable to act as an IGMP Non-Querier.
Querier Address
Define the IPv4 address as source address used in IP header for IGMP Querier election.
When the Querier address is not set, system uses IPv4 management address of the IP interface associated
with this VLAN.
When the IPv4 management address is not set, system uses the first available IPv4 management address.
Otherwise, system uses a pre-defined value. By default, this value will be 192.0.2.1.