Optical Systems Design OSD2524, User Manual

Page: 179 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 179
Instance
The ID of the MEP. Click on the ID of a MEP to enter the configuration page. The range is from
1
through
100
.
Domain
Port: This is a MEP in the Port Domain.
EVC: This is a MEP in the EVC Domain. 'Flow Instance' is an EVC. The EVC must be created
VLAN: This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN. In case of Up-MEP the VLAN
must be created
Mode
MEP: This is a Maintenance Entity End Point.
MIP: This is a Maintenance Entity Intermediate Point.
Direction
Down: This is a Down MEP - monitoring ingress OAM and traffic on 'Residence Port'.
Up: This is a Up MEP - monitoring egress OAM and traffic on 'Residence Port'.
Residence Port
The port where MEP is monitoring - see 'Direction'. For a EVC MEP the port must be a port in the EVC.
For a VLAN MEP the port must be a VLAN member.
Level
The MEG level of this MEP.
Flow Instance
The MEP is related to this flow - See 'Domain'. This is not relevant and not shown in case of Port MEP.
Tagged VID
Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this VID. Entering '0'
means no TAG added.
EVC MEP: This is not used.
VLAN MEP: This is not used.
EVC MIP: On Serval, this is the Subscriber VID that identify the subscriber flow in this EVC where the
MIP is active.
This MAC
The MAC of this MEP - can be used by other MEP when unicast is selected (Info only).
Alarm