manualshive.com logo in svg

Optical Systems Design OSD2524, User Manual, Page: 397 / 402

Share
Download
Optical Systems Design OSD2524 User Manual Download Page 397

 

OPTICAL SYSTEMS DESIGN 

 

DOC ID: 10120001 

OSD2524 OPERATOR MANUAL

 

 
 

PAGE 397  

 
 
 
 
 
 

UPLOAD CONFIGURATION 

 

Maintenance 

→

 Configuration 

→

 Upload 

 
 

 

 

It is possible to upload a file from the web browser to all the files on the switch, except 

default-

config

 which is read-only. 

Select the file to upload, select the destination file on the target, then click 

.  

If the destination is 

running-config

, the file will be applied to the switch configuration. This can 

be done in two ways:  

•

 

Replace mode: The current configuration is fully replaced with the configuration in the 
uploaded file. 

•

 

Merge mode: The uploaded file is merged into 

running-config

. 

If the flash file system is full (i.e. contains 

default-config

 and 32 other files, usually including 

startup-config

), it is not possible to create new files. Instead an existing file must be 

overwritten or another file must be deleted.  

 
 
 
 
 
 
 
 
 

Summary of Contents for OSD2524



















































































































































































































































































































































































































Reviews:

No comments