Optical Systems Design OSD2524, User Manual

Page: 197 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 197
MAC-BASED VLAN MEMBERSHIP CONFIGURATION
Configuration
→
VCL
→
MAC-based VLAN
The MAC address to VLAN ID mappings can be configured here. This page allows adding and
deleting MAC-based VLAN Classification List entries and assigning the entries to different
ports.
Delete
To delete a MAC to VLAN ID mapping entry, check this box and press save. The entry will be deleted in
the stack.
MAC Address
Indicates the MAC address of the mapping.
VLAN ID
Indicates the VLAN ID the above MAC will be mapped to.
Port Members
A row of check boxes for each port is displayed for each MAC to VLAN ID mapping entry. To include a
port in the mapping, check the box. To remove or exclude the port from the mapping, make sure the box
is unchecked. By default, no ports are members, and all boxes are unchecked.
Adding a New MAC to VLAN ID mapping entry
Click to add a new MAC to VLAN ID mapping entry. An empty row is added to the table,
and the mapping can be configured as needed. Any unicast MAC address can be used to configure the
mapping. No broadcast or multicast MAC addresses are allowed. Legal values for a VLAN ID are
1
through
4095
.