Optical Systems Design OSD2524, User Manual

Page: 146 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 146
Interface Channel Profile
When the MVR VLAN is created, select the IPMC Profile as the channel filtering condition for the
specific MVR VLAN. Summary about the Interface Channel Profiling (of the MVR VLAN) will be
shown by clicking the view button. Profile selected for designated interface channel is not allowed to
have overlapped permit group address.
Profile Management Button
You can inspect the rules of the designated profile by using the following button:
: List the rules associated with the designated profile.
Port
The logical port for the settings.
Port Role
Configure an MVR port of the designated MVR VLAN as one of the following roles.
Inactive : The designated port does not participate MVR operations.
Source : Configure uplink ports that receive and send multicast data as source ports. Subscribers cannot
be directly connected to source ports.
Receiver : Configure a port as a receiver port if it is a subscriber port and should only receive multicast
data. It does not receive data unless it becomes a member of the multicast group by issuing IGMP/MLD
messages.
Be Caution : MVR source ports are not recommended to be overlapped with management VLAN ports.
Select the port role by clicking the Role symbol to switch the setting.
I indicates Inactive; S indicates Source; R indicates Receiver
The default Role is Inactive.
Immediate Leave
Enable the fast leave on the port.
Buttons
: Click to add new MVR VLAN. Specify the VID and configure the new
entry. Click "Save".
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
IPMC