Optical Systems Design OSD2524, User Manual

Page: 39 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 39
Configure System Log on this page.
Server Mode
Indicates the server mode operation. When the mode operation is enabled, the syslog message will send
out to syslog server. The syslog protocol is based on UDP communication and received on UDP port 514
and the syslog server will not send acknowledgments back sender since UDP is a connectionless protocol
and it does not provide acknowledgments. The syslog packet will always send out even if the syslog
server does not exist. Possible modes are:
Enabled
: Enable server mode operation.
Disabled
: Disable server mode operation.
Server Address
Indicates the IPv4 host address of syslog server. If the switch provide DNS feature, it also can be a
domain name
.
Syslog Level
Indicates what kind of message will send to syslog server. Possible modes are:
Error
: Send the specific messages which severity code is less or equal than Error (3).
Warning
: Send the specific messages which severity code is less or equal than Warning (4).
Notice
: Send the specific messages which severity code is less or equal than Notice (5).
Informational
: Send the specific messages which severity code is less or equal than Informational
(6).
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.