Optical Systems Design OSD2524, User Manual

Page: 255 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 255
PORT CONFIGURATION
Port
The port number for which the configuration below applies.
Flow Sampler Enabled
Enables/disables flow sampling on this port.
Flow Sampler Sampling Rate
The statistical sampling rate for packet sampling. Set to N to sample on average 1/Nth of the packets
transmitted/received on the port.
Not all sampling rates are achievable. If an unsupported sampling rate is requested, the switch will
automatically adjust it to the closest achievable. This will be reported back in this field. Valid range is 1
to 4294967295.
Flow Sampler Max. Header
The maximum number of bytes that should be copied from a sampled packet to the sFlow datagram.
Valid range is 14 to 200 bytes with default being 128 bytes.
If the maximum datagram size does not take into account the maximum header size, samples may be
dropped.
Counter Poller Enabled
Enables/disables counter polling on this port.
Counter Poller Interval
With counter polling enabled, this specifies the interval - in seconds - between counter poller samples.
Valid range is 1 to 3600 seconds.
Buttons
:
See description under Owner.
: Click to refresh the page. Note that unsaved changes will be lost.
: Click to save changes. Note that sFlow configuration is not persisted to non-volatile
memory.
: Click to undo any changes made locally and revert to previously saved values.
UDLD PORT CONFIGURATION