Optical Systems Design OSD2524 User Manual Download Page 288

Page: 288 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 288

DHCP Server Binding IP

Monitor

→

DHCP

→

Server

→

Binding

This page displays bindings generated for DHCP clients.

BINDING IP ADDRESS

Display all bindings.

IP address allocated to DHCP client.

Type

Type of binding. Possible types are Automatic, Manual, Expired.

State

State of binding. Possible states are Committed, Allocated, Expired.

Pool Name

The pool that generates the binding.

Server ID

Server IP address to service the binding.

Buttons

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Optical Systems Design OSD2524, User Manual, Page: 288 / 402

Search results

Summary of Contents for OSD2524

Reviews: