Optical Systems Design OSD2524, User Manual

Page: 395 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 395
: Click to use the alternate image. This button may be disabled
depending on system state.
: Cancel activating the backup image. Navigates away from this page.
CONFIGURATION
SAVE RUNNING CONFIGURATION TO STATIP-CONFIG
Maintenance
→
Configuration
→
Save Startup-Config
The switch stores its configuration in a number of text files in CLI format. The files are either
virtual (RAM-based) or stored in flash on the switch.
The available files are:
•
running-config : A virtual file that represents the currently active configuration on the switch. This file is
volatile.
•
startup-config : The startup configuration for the switch, read at boot time. If this file doesn't exist at boot
time, the switch will start up in default configuration.
•
default-config : A read-only file with vendor-specific configuration. This file is read when the system is
restored to default settings.
•
Up to 31 other files, typically used for configuration backups or alternative configurations.
Save startup-config
This copies running-config to startup-config , thereby ensuring that the currently active
configuration will be used at the next reboot.