Optical Systems Design OSD2524, User Manual

Page: 186 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 186
GLOBAL VLAN CONFIGURATION
Configuration
→
VLANs
This page allows for controlling VLAN configuration on the switch.
The page is divided into a global section and a per-port configuration section.
GLOBAL VLAN CONFIGURATION
Allowed Access VLANs
This field shows the allowed Access VLANs, i.e. it only affects ports configured as Access ports. Ports in
other modes are members of the VLANs specified in the Allowed VLANs field. By default, only VLAN
1 is enabled. More VLANs may be created by using a list syntax where the individual elements are
separated by commas. Ranges are specified with a dash separating the lower and upper bound.
The following example will create VLANs 1, 10, 11, 12, 13, 200, and 300:
1,10-13,200,300
. Spaces
are allowed in between the delimiters.
Ethertype for Custom S-ports
This field specifies the ethertype/TPID (specified in hexadecimal) used for Custom S-ports. The setting is
in force for all ports whose Port Type is set to S-Custom-Port.