Optical Systems Design OSD2524 User Manual Download Page 294

Page: 294 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 294

Transmit Error

The number of packets that resulted in error while being sent to servers.

Receive from Client

The number of received packets from server.

Receive Agent Option

The number of received packets with relay agent information option.

Replace Agent Option

The number of packets which were replaced with relay agent information option.

Keep Agent Option

The number of packets whose relay agent information was retained.

Drop Agent Option

The number of packets that were dropped which were received with relay agent information.

Buttons

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs

every 3 seconds.

: Click to refresh the page immediately

: Clear all statistics

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands

Optical Systems Design OSD2524, User Manual

Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands