Optical Systems Design OSD2524, User Manual

Page: 71 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 71
Configure access management table on this page. The maximum number of entries is
16
. If the
application's type match any one of the access management entries, it will allow access to the
switch.
Mode
Indicates the access management mode operation. Possible modes are:
Enabled
: Enable access management mode operation.
Disabled
: Disable access management mode operation.
Delete
Check to delete the entry. It will be deleted during the next save.
VLAN ID
Indicates the VLAN ID for the access management entry.
Start IP address
Indicates the start IP address for the access management entry.
End IP address
Indicates the end IP address for the access management entry.
HTTP/HTTPS
Indicates that the host can access the switch from HTTP/HTTPS interface if the host IP address matches
the IP address range provided in the entry.
SNMP
Indicates that the host can access the switch from SNMP interface if the host IP address matches the IP
address range provided in the entry.
TELNET/SSH
Indicates that the host can access the switch from TELNET/SSH interface if the host IP address matches
the IP address range provided in the entry.
Buttons
: Click to add a new access management entry.