Optical Systems Design OSD2524 User Manual Download Page 36

Page: 36 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 36

Time Zone

This page allows you to configure the Time Zone.

Time Zone Configuration

•

Time Zone

- Lists various Time Zones world wide. Select appropriate Time Zone from the drop down

and click Save to set.

•

Acronym

- User can set the acronym of the time zone. This is a User configurable acronym to identify

the time zone. ( Range : Up to 16 characters )

Daylight Saving Time

This page is used to setup Daylight Saving Time Configuration.

Daylight Saving Time Configuration

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Optical Systems Design OSD2524, User Manual, Page: 36 / 402

Search results

Summary of Contents for OSD2524

Reviews: