Optical Systems Design OSD2524, User Manual

Page: 194 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 194
PRIVATE VLAN MEMBERSHIP CONFIGURATION
Configuration
→
Private VLANs
→
Membership
The Private VLAN membership configurations for the switch can be monitored and modified
here. Private VLANs can be added or deleted here. Port members of each Private VLAN can be
added or removed here.
Private VLANs are based on the source port mask, and there are no connections to VLANs.
This means that VLAN IDs and Private VLAN IDs can be identical.
A port must be a member of both a VLAN and a Private VLAN to be able to forward packets.
By default, all ports are VLAN unaware and members of VLAN 1 and Private VLAN 1.
A VLAN unaware port can only be a member of one VLAN, but it can be a member of
multiple Private VLANs.
Delete
To delete a private VLAN entry, check this box. The entry will be deleted during the next save.
Private VLAN ID
Indicates the ID of this particular private VLAN.
Port Members
A row of check boxes for each port is displayed for each private VLAN ID. To include a port in a Private
VLAN, check the box. To remove or exclude the port from the Private VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked.
Adding a New Private VLAN
Click to add a new private VLAN ID. An empty row is added to the table, and the
private VLAN can be configured as needed. The allowed range for a private VLAN ID is the same as the
switch port number range. Any values outside this range are not accepted, and a warning message
appears. Click "OK" to discard the incorrect entry, or click "Cancel" to return to the editing and make a
correction.