Optical Systems Design OSD2524 User Manual Download Page 289

Page: 289 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 289

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs

every 3 seconds.

: Click to refresh the page immediately.

: Click to clear selected bindings. If the selected binding is Automatic or

Manual, then it is changed to be Expired. If the selected binding is expired, then it is freed.

: Click to clear all Automatic bindings and Change them to Expired

bindings.

: Click to clear all Manual bindings and Change them to Expired bindings.

: Click to clear all Expired bindings and free them.

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Optical Systems Design OSD2524, User Manual, Page: 289 / 402

Search results

Summary of Contents for OSD2524

Reviews: