Optical Systems Design OSD2524, User Manual, Page: 321 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 321
server.
Tx
Pending
Requests
radiusAuthClientExtPendingRequests
The number of RADIUS
Access-Request packets
destined for the server that
have not yet timed out or
received a response. This
variable is incremented
when an Access-Request
is sent and decremented
due to receipt of an
Access-Accept, Access-
Reject, Access-Challenge,
timeout, or
retransmission.
Tx Timeouts radiusAuthClientExtTimeouts
The number of
authentication timeouts to
the server. After a
timeout, the client may
retry to the same server,
send to a different server,
or give up. A retry to the
same server is counted as
a retransmit as well as a
timeout. A send to a
different server is counted
as a Request as well as a
timeout.
Other Info
This section contains information about the state of the server and the latest round-trip time.
Name RFC4668 Name Description
IP
Address
-
IP address and UDP port for the authentication server in
question.
State -
Shows the state of the server. It takes one of the following
values:
Disabled
: The selected server is disabled.
Not Ready
: The server is enabled, but IP
communication is not yet up and running.
Ready
: The server is enabled, IP communication is up
and running, and the RADIUS module is ready to accept
access attempts.
Dead (X seconds left)
: Access attempts were
made to this server, but it did not reply within the
configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time
expires. The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable
when more than one server is enabled.
Round-
Trip
radiusAuthClientExtRoundTripTime
The time interval (measured in milliseconds) between the
most recent Access-Reply/Access-Challenge and the