Optical Systems Design OSD2524, User Manual

Page: 378 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 378
: Updates the table, starting with the entry after the last entry currently displayed
VLANS
VLAN MEMBERSHIP STATUS FOR COMBINED USERS
Monitor
→
VLANs
→
Membership
This page provides an overview of membership status of VLAN users.
VLAN User
Various internal software modules may use VLAN services to configure VLAN memberships on the fly.
The drop-down list on the right allows for selecting between showing VLAN memberships as configured
by an administrator (Admin) or as configured by one of these internal software modules.
The "Combined" entry will show a combination of the administrator and internal software modules
configuration, and basically reflects what is actually configured in hardware.
VLAN ID
VLAN ID for which the Port members are displayed.
Port Members
A row of check boxes for each port is displayed for each VLAN ID.
If a port is included in a VLAN, the following image will be displayed:
.
If a port is in the forbidden port list, the following image will be displayed: .
If a port is in the forbidden port list and at the same time attempted included in the VLAN, the following
image will be displayed:
. The port will not be a member of the VLAN in this case.
NAVIGATING THE VLAN MEMBERSHIP STATUS PAGE
Each page shows up to 99 entries from the VLAN table (default being 20), selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the VLAN Table. The first displayed will be the one with the lowest
VLAN ID found in the VLAN Table.
The "VLAN" input field allows the user to select the starting point in the VLAN Table.