Optical Systems Design OSD2524 User Manual Download Page 198

Page: 198 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 198

The MAC to VLAN ID entry is enabled when you click on "Save". A mapping without
any port members will not be added when you click "Save".

The

button can be used to undo the addition of new mappings. The maximum

possible MAC to VLAN ID mapping entries are limited to 256.

Buttons

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs

every 3 seconds.

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

: Refreshes the displayed table starting from the input fields.

PROTOCOL-BASED VLAN

Protocol to Group

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands

Optical Systems Design OSD2524, User Manual

Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands