manualshive.com logo in svg

Optical Systems Design OSD2524, User Manual, Page: 180 / 402

Share
Download
Optical Systems Design OSD2524 User Manual Download Page 180

 

OPTICAL SYSTEMS DESIGN 

 

DOC ID: 10120001 

OSD2524 OPERATOR MANUAL

 

 
 

PAGE 180  

There is an active alarm on the MEP.  
 
 

Buttons 
 

: Click to add a new MEP entry.

 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values. 

 

: Refreshes the displayed table starting from the input fields. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

ETHERNET RING PROTECTION SWITCHING 

 

 

Configuration 

→

 ERPS 

 

 

 

The ERPS instances are configured here. 

Delete 

This box is used to mark an ERPS for deletion in next Save operation.  
 

ERPS ID 

The ID of the created Protection group, It must be an integer value between 1 and 64. The maximum 
number of ERPS Protection Groups that can be created are 64. Click on the ID of an Protection group to 
enter the configuration page.  

Summary of Contents for OSD2524



















































































































































































































































































































































































































Reviews:

No comments