Optical Systems Design OSD2524, User Manual

Page: 119 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 119
This page allows you to configure the servers.
GLOBAL CONFIGURATION
These setting are common for all of the servers.
Timeout
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a server
before it is considered to be dead.
Deadtime
Deadtime, which can be set to a number between 0 to 1440 minutes, is the period during which the switch
will not send new requests to a server that has failed to respond to a previous request. This will stop the
switch from continually trying to contact a server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only if more than one
server has been configured.
Key
The secret key - up to 63 characters long - shared between the server and the switch.
SERVER CONFIGURATION
The table has one row for each server and a number of columns, which are:
Delete
To delete a server entry, check this box. The entry will be deleted during the next Save.
Hostname
The IP address or hostname of the server.
Port