Optical Systems Design OSD2524 User Manual Download Page 269

Page: 269 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 269

THERMAL PROTECTION STATUS

Monitor

→

Thermal Protection

This page allows the user to inspect status information related to thermal protection.

Port

The switch port number.

Temperature

Shows the current chip temperature in degrees Celsius.

Port Status

Shows if the port is thermally protected (link is down) or if the port is operating normally.

Buttons

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs

every 3 seconds.

: Click to refresh the page immediately.

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Optical Systems Design OSD2524, User Manual, Page: 269 / 402

Search results

Summary of Contents for OSD2524

Reviews: