Optical Systems Design OSD2524, User Manual

Page: 203 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 203
The IP subnet to VLAN ID mappings can be configured here. This page allows adding,
updating and deleting IP subnet to VLAN ID mapping entries and assigning them to different
ports.
Delete
To delete a mapping, check this box and press save. The entry will be deleted in the stack.
IP Address
Indicates the subnet's IP address (Any of the subnet's host addresses can be also provided here, the
application will convert it automatically).
Mask Length
Indicates the subnet's mask length.
VLAN ID
Indicates the VLAN ID the subnet will be mapped to. IP Subnet to VLAN ID is a unique matching.
Port Members
A row of check boxes for each port is displayed for each IP subnet to VLAN ID mapping entry. To
include a port in a mapping, simply check the box. To remove or exclude the port from the mapping,
make sure the box is unchecked. By default, no ports are members and all boxes are unchecked.
Adding a New IP subnet-based VLAN
Click to add a new IP subnet to VLAN ID mapping entry. An empty row is added to the
table, and the mapping can be configured as needed. Any IP address/mask can be configured for the
mapping. Legal values for the VLAN ID are
1
to
4095
.
The IP subnet to VLAN ID mapping entry is enabled when you click on "Save". The button can
be used to undo the addition of new mappings. The maximum possible IP subnet to VLAN ID mappings
are limited to 128.
Buttons