Optical Systems Design OSD2524, User Manual

Page: 34 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 34
After making sure the specific link-local address is unique on the IPv6 link in use, delete and then add the
specific IPv6 interface to restart the IPv6 operations on this interface.
IP Routes
Delete
Select this option to delete an existing IP route.
Network
The destination IP network or host address of this route. Valid format is dotted decimal notation or a
valid IPv6 notation. A default route can use the value
0.0.0.0
or IPv6
::
notation.
Mask Length
The destination IP network or host mask, in number of bits ( prefix length ). It defines how much of a
network address that must match, in order to qualify for this route. Valid values are between 0 and 32 bits
respectively 128 for IPv6 routes. Only a default route will have a mask length of
0
(as it will match
anything).
Gateway
The IP address of the IP gateway. Valid format is dotted decimal notation or a valid IPv6 notation.
Gateway and Network must be of the same type.
Next Hop VLAN (Only for IPv6)
The VLAN ID (VID) of the specific IPv6 interface associated with the gateway.
The given VID ranges from 1 to 4095 and will be effective only when the corresponding IPv6 interface is
valid.
If the IPv6 gateway address is link-local, it must specify the next hop VLAN for the gateway.
If the IPv6 gateway address is not link-local, system ignores the next hop VLAN for the gateway.
Buttons
: Click to add a new IP interface. A maximum of 8 interfaces is supported.
: Click to add a new IP route. A maximum of 32 routes is supported.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
NTP CONFIGURATION
Configuration
→
System
→
NTP