Optical Systems Design OSD2524 User Manual Download Page 228

Page: 228 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 228

QOS EGRESS PORT TAG REMARKING

Configuration

→

QoS

→

Port Tag Remarking

This page provides an overview of QoS Egress Port Tag Remarking for all switch ports.

The displayed settings are:

Port

The logical port for the settings contained in the same row.
Click on the port number in order to configure tag remarking.

Mode

Shows the tag remarking mode for this port.

Classified

: Use classified PCP/DEI values.

Default

: Use default PCP/DEI values.

Mapped

: Use mapped versions of QoS class and DP level.

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Optical Systems Design OSD2524, User Manual, Page: 228 / 402

Search results

Summary of Contents for OSD2524

Reviews: