Optical Systems Design OSD2524, User Manual

Page: 394 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 394
SOFTWARE IMAGE SELECTION
Maintenance
→
Software
→
Image Select
This page provides information about the active and alternate (backup) firmware images in the
device, and allows you to revert to the alternate image.
The web page displays two tables with information about the active and alternate firmware
images.
Note:
1. In case the active firmware image is the alternate image, only the "Active Image" table is shown. In this
case, the
Activate Alternate Image
button is also disabled.
2. If the alternate image is active (due to a corruption of the primary image or by manual intervention),
uploading a new firmware image to the device will automatically use the primary image slot and activate
this.
3. The firmware version and date information may be empty for older firmware releases. This does not
constitute an error.
IMAGE INFORMATION
Image
The file name of the firmware image, from when the image was last updated.
Version
The version of the firmware image.
Date
The date where the firmware was produced.
Buttons