Optical Systems Design OSD2524, User Manual

Page: 64 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 64
System: Contact, Name, Location, Timezone, Daylight Saving Time, Log.
Security: Authentication, System Access Management, Port (contains Dot1x port, MAC based and the
MAC Address Limit), ACL, HTTPS, SSH, ARP Inspection, IP source guard.
IP: Everything except 'ping'.
Port: Everything except 'VeriPHY'.
Diagnostics: 'ping' and 'VeriPHY'.
Maintenance: CLI- System Reboot, System Restore Default, System Password, Configuration Save,
Configuration Load and Firmware Load. Web- Users, Privilege Levels and everything in Maintenance.
Debug: Only present in CLI.
Privilege Levels
Every group has an authorization Privilege level for the following sub groups: configuration read-only,
configuration/execute read-write, status/statistics read-only, status/statistics read-write (e.g. for clearing
of statistics). User Privilege should be same or greater than the authorization Privilege level to have the
access to that group.
Notes that some web pages (for example, MPLS-TP and MEP BFD pages) are based on JSON to transmit
dynamic data between the web server and application. These pages require the configuration Read/Write
privilege of JSON_RPC group before any operations. This requirement must be met first, then it will
evaluate the current privilege level against the required privilege level for the given method. For example,
assumes the MPLS-TP page only allows Read-Only attribute under privilege level 5, the privilege
configuration should be set as JSON_RPC:[5,5,5,5] and MPLS_TP:[5,10,5,10].
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Authentication Method Configuration
Configuration
→
Security
→
Switch
→
Auth Method