Optical Systems Design OSD2524, User Manual

Page: 126 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 126
PASSIVE MODE
DTE's configured in Passive mode do not initiate the Discovery process. Passive DTE's react to the
initiation of the Discovery process by the remote DTE. This eliminates the possibility of passive to
passive links. Passive DTE's shall not send Variable Request or Loopback Control OAMPDUs.
Loopback Support
Controls whether the loopback support is enabled for the switch port. Link OAM remote loopback can be
used for fault localization and link performance testing. Enabling the loopback support will allow the
DTE to execute the remote loopback command that helps in the fault detection.
Link Monitor Support
Controls whether the Link Monitor support is enabled for the switch port. On enabling the Link Monitor
support, the DTE supports event notification that permits the inclusion of diagnostic information.
MIB Retrieval Support
Controls whether the MIB Retrieval Support is enabled for the switch port. On enabling the MIB retrieval
support, the DTE supports polling of various Link OAM based MIB variables' contents.
Loopback Operation
If the Loopback support is enabled, enabling this field will start a loopback operation for the port.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
LINK EVENT CONFIGURATION