Optical Systems Design OSD2524, User Manual

Page: 35 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 35
Configure NTP on this page.
Mode
Indicates the NTP mode operation. Possible modes are:
Enabled
: Enable NTP client mode operation.
Disabled
: Disable NTP client mode operation.
Server #
Provide the IPv4 or IPv6 address of a NTP server. IPv6 address is in 128-bit records represented as eight
fields of up to four hexadecimal digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can appear only once. It can also represent
a legally valid IPv4 address. For example, '::192.1.2.34'. In addition, it can also accept a domain name
address.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
TIME ZONE CONFIGURATION
Configuration
→
System
→
Time